Inserting a keg into your PerfectDraft Machine is easy, and takes no time at all - There's even some helpful videos!

  1. Remove the black cap from the top of your keg

  2. Take the tube from the top of your keg out of the plastic packaging and wet the tube

  3. Insert the tube into the blue/grey tap unit

  4. Push the tap unit down on top of the keg, when it is properly attached you will hear 2 clicks

  5. Open the doors of your machine and raise the 2 blue forks

  6. Fit the tap unit between the blue forks so the keg sits in the machine and the tap handle is facing you

  7. Push down the blue forks and close the doors

  8. Switch your machine on and you should hear the machine make a noise and see the screen switch on

Click this link to view the rest of our PD help videos

If you need a hand, you can find out how to get in touch with us here.